Hotline Tel:

13463728023

带压堵漏

Product

Contact us

Mob: 13463728023

Tel: +86-317-6343268

Fax: +86-317-6343936

Add: No.161,Fantang Industry Zone,Qingyun Town, Yanshan County, Hebei Province.

E-mail: huamao00111@126.com

The steel aluminum drag chain can be customized in some parts.

Your current location: Home >> 新闻资讯

The steel aluminum drag chain can be customized in some parts.

发布日期:2018-3-12 15:03:13 来源:管理员

  The steel aluminum drag chain can be customized in some parts.

  In fact, the steel aluminum drag chain can be made according to requirements, such as width, etc. The width of the steel aluminum towing chain is between 800 and 50. When the cable and pipe are required to be disassembled, repaired or repaired, the size of the joint is larger than that of the inner cavity of the support plate.

  Can choose general support plate and the separated type steel drag chain, need to carry large cables, tube bearing when, should choose the support plate and high strength aluminum blocks type steel drag chain, pin to use alloy steel carburizing or manganese steel, which can strengthen the wear resistance and hardness, thus increasing the service life of steel drag chain and strength, should choose standard support plate thickness of pultrusion aluminium alloy, the installation of cable and pipe specifications very much, can choose the general support plate and frame type steel drag chain. The height of the chain plate, that is, the height of the support plate, is determined by the maximum diameter of cable, machine tool operation, the maximum as the width of the drag chain of more than 300 mm, the length of the drag chain for stability reasons, when more than 4 m should consider to choose a bigger dress size specifications of the drag chain.

上一条: The development trend of steel aluminum tow chain.

下一条: 没有了